Seiko V-64S Guia do Utilizador descarregar pdf (Página 197)

4-49

Maintenance and Adjustment / Replacement

Adjustment during operation

If the adjustment is left in the initial adjustment state, depending on this state of

media, the winding defect such as uneven wound may occur.

In this case, avoid the symptom by turning the adjustment screw on the plate

(left).

Counterclockwise

: The left side position

of Tension bar is lowered.

Clockwise

: The left side position

of Tension bar is raised.

By turning the adjustment screw on the

plate (left), adjust the position of Tension bar.

< Adjustment example >

When take-up, it shifts in the left direction.

(When viewed from the printer front)

The media is wound in the right direction.

Media

Turn counterclockwise the

adjustment screw.

(The right side position of

Tension bar is lowered.)

Note

- Adjustment may be needed several times during a long print, depending on the

condition of the media.,

q Adjustment of take-up reel unit

IP-5610取説_E.indb 49 09.4.3 3:15:35 PM

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 232 233

Sem comentários

Seiko V-64S Guia do Utilizador Página 197