Seiko V-64S Guia do Utilizador descarregar pdf (Página 196)

4-48

First, adjust the right side. Align the horizontal line of adjustment

pattern with the horizontal line (groove) on the outer

circumference of Tension bar.

Next, adjust the left side. Conrm that the

horizontal line of adjustment pattern is

aligned with the horizontal line (groove) on

the outer circumference of Tension bar.

Turn the adjustment screw on the plate (left) to

move up or down so that the shift is within the

allowable range (about 1mm).

2-1

2-2

Counterclockwise:

The position of left side of Tension

bar is lowered.

Clockwise:

The position of left side of Tension

bar is raised.

The horizontal line is shifted from the groove.

: The adjustment is necessary.

The horizontal line is aligned

with the groove.: Normal

Groove of Tension bar

Horizontal line of

adjustment pattern

Observe the horizontal line of adjustment pattern and the position of groove

of Tension bar with the line. Adjust using the procedure below.

IP-5610取説_E.indb 48 09.4.3 3:15:34 PM

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 232 233

Sem comentários

Seiko V-64S Guia do Utilizador Página 196