Seiko LTP F Series Especificações descarregar pdf (Página 9)

-２

２２

２

1.2 DESIGN AND HANDLING PRECAUTIONS

1.2.1 Design Precautions

•

Connect the FG line to the screw hole on the back of the autocutter and connect it to the FG (Frame

Ground) to prevent abnormal operation due to electrostatics.

•

In the ACU F Series, a part of the movable blade and the fixed blade are placed outside of the

autocutter so that paper can be set separately of the autocutter. The movable blade protrudes from

the autocutter during cutting.

Design the outer case to prevent the user from touching the bIades during cutting or while replacing

paper, or else provide sufficient warnings.

•

If the movable blade and fixed blade are not placed at proper position, cutting failure or paper jam

may be caused. Therefore, pay special attention to it when designing the outer case.

For position relation between the movable blade unit and fixed blade unit, see CHAPTER 6

CONSIDERATIONS WHEN MOUNTING THE AUTOCUTTER.

•

Paper jam may be caused depending on electrostatic, humidity or size of diameter of paper curling

direction tendency in some shape of the paper outlet. Pay special attention to it when designing the

outer case.

1.2.2 Handling Precautions

•

Never loosen screws which fasten the parts of the autocutter. If the screws are loosened, the

adjustment of the autocutter may be lost.

•

The autocutter should be handled only after completely stopping an activation to the autocutter.

•

Label paper or carbon paper is not available. When label paper, carbon paper and/or the paper of

thickness other than specified paper thickness are used, high cutting quality and long life of the

autocutter cannot be guaranteed.

•

The autocutter is not water-proof. Prevent contact with water and do not operate with wet hands as it

may damage the autocutter or cause a short circuit or fire.

•

The autocutter is not dust-proof. If the autocutter is used in dusty places, high cutting quality and long

life of the autocutter cannot be guaranteed.

1.2.3 Precautions on Discarding

When discarding used autocutters, discard them according to the disposal regulations and rules of each

respective district.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 30 31

Sem comentários

Seiko LTP F Series Especificações Página 9