Seiko TM-L60 Especificações

TM-L60II/L60II P Using this online information guid e The words on the left side of this screen are bookmark s for all the topics in this guide .

Rev. A Command Descriptions 1-3TM–L60II/L60IIP Information ManualGS c Print counter Miscellaneous function 1-63GS f Set font for HRI characters

1-4 Command Descriptions Rev. AUsing Bit Value TablesFor each command that has a complex method of determining the variable n, there is a table show

Rev. A Command Descriptions 1-5TM–L60II/L60IIP Information ManualPrint CommandsThe TM-L60II/L60IIP printers support the following commands for

1-6 Command Descriptions Rev. ACR[Name] Print and carriage return[Format] ASCII CRHex 0DDecimal 13When auto line feed is enabled, the CR command fun

Rev. A Command Descriptions 1-7TM–L60II/L60IIP Information ManualESC d n[Name] Print and feed n lines[Format] ASCII ESC d nHex 1B 64 nDecimal 2

1-8 Command Descriptions Rev. AESC FF[Name] Print data in page mode[Format] ASCII ESC FFHex 1B 0CDecimal 27 12FF[Name] ➀ Print and return to standar

Rev. A Command Descriptions 1-9TM–L60II/L60IIP Information ManualFF[Name] ➁ Print and feed label to print starting position (on label)[Format]

1-10 Command Descriptions Rev. ALine Spacing CommandsThe TM-L60II/L60IIP printers support the following commands for setting line spacing. These com

Rev. A Command Descriptions 1-11TM–L60II/L60IIP Information ManualCharacter CommandsThe TM-L60II/L60IIP supports the following commands for set

1-12 Command Descriptions Rev. AESC SP n[Name] Set right-side character spacing[Format] ASCII ESC SP nHex 1B 20 nDecimal 27 32 n[Range] 0 ≤ n ≤ 255E

EPSONGuide toTM-L60II/L60IIPSEIKO EPSON CORPORATION®400617700

Rev. A Command Descriptions 1-13TM–L60II/L60IIP Information ManualESC % n[Name] Select/cancel user-defined character set[Format] ASCII ESC % nH

1-14 Command Descriptions Rev. AESC ? n cancels the user-defined characters defined for the character code n. After the user-defined characters are

Rev. A Command Descriptions 1-15TM–L60II/L60IIP Information ManualESC R n[Name] Select an international character set[Format] ASCII ESC R nHex

1-16 Command Descriptions Rev. AESC t n[Name] Select character code table[Format] ASCII ESC t nHex 1B 74 nDecimal 27 116 n[Range] 0 ≤ n ≤ 5, n = 25

Rev. A Command Descriptions 1-17TM–L60II/L60IIP Information ManualESC ! n[Name] Select print mode(s)[Format] ASCII ESC ! nHex 1B 21 nDecimal 27

1-18 Command Descriptions Rev. AESC – n[Name] Turn underline mode on/off[Format] ASCII ESC – nHex 1B 2D nDecimal 27 45 n[Range] 0 ≤ n ≤ 2, 48 ≤ n ≤

Rev. A Command Descriptions 1-19TM–L60II/L60IIP Information ManualESC G n[Name] Turn double-strike mode on/off[Format] ASCII ESC G nHex 1B 47 n

1-20 Command Descriptions Rev. AESC { n[Name] Turn upside-down printing mode on/off[Format] ASCII ESC { nHex 1B 7B nDecimal 27 123 n[Range] 0 ≤ n ≤

Rev. A Command Descriptions 1-21TM–L60II/L60IIP Information ManualESC V n[Name] Turn 90° clockwise rotation mode on/off[Format] ASCII ESC V nHe

1-22 Command Descriptions Rev. AGS ! n[Name] Select character size[Format] ASCII GS ! nHex 1D 21 nDecimal 29 33 n[Range] 0≤ n ≤ 255GS ! n selects th

The programming examples in this manual are provided for the sole purpose of illustrating the functions of the products. Seiko Epson Corporation makes

Rev. A Command Descriptions 1-23TM–L60II/L60IIP Information ManualGS B n[Name] Turn white/black reverse printing mode on/off[Format] ASCII GS B

1-24 Command Descriptions Rev. ACAN[Name] Cancel print data in page mode[Format] ASCII CANHex 18Decimal 24CAN deletes all the print data in the curr

Rev. A Command Descriptions 1-25TM–L60II/L60IIP Information ManualPanel Button CommandThe TM-L60II/L60IIP printers support the following comman

1-26 Command Descriptions Rev. APaper Sensor CommandsThe TM-L60II/L60IIP printers support the following commands for controlling the paper sensor(s)

Rev. A Command Descriptions 1-27TM–L60II/L60IIP Information ManualESC c 3 n[Name] Select paper sensor(s) to output paper-end signals[Format] AS

1-28 Command Descriptions Rev. APrint Position CommandsThe TM-L60II/L60IIP printers support the following commands for setting the print position:Co

Rev. A Command Descriptions 1-29TM–L60II/L60IIP Information ManualESC $ nL nH[Name] Set absolute print position[Format] ASCII ESC $ nL nHHex 1

1-30 Command Descriptions Rev. AESC a n[Name] Select justification[Format] ASCII ESC a nHex 1B 61 nDecimal 27 97 n[Range] 0 ≤ n ≤ 248 ≤ n ≤ 50ESC a

Rev. A Command Descriptions 1-31TM–L60II/L60IIP Information ManualHT[Name] Horizontal tab[Format] ASCII HTHex 09Decimal 10ESC D n1...nk NUL[Nam

1-32 Command Descriptions Rev. AGS L nL nH[Name] Set left margin[Format] ASCII GS L nL nHHex 1D 4C nL nHDecimal 29 76 nL nH[Range] 0 ≤ nL ≤ 2550 ≤ n

Rev. A iIntroductionESC/POS™The market for store automation equipment is changing rapidly with the widespread introduction of POS (point of sale) t

Rev. A Command Descriptions 1-33TM–L60II/L60IIP Information ManualESC W xL xH yL yH dxL dxH dyL dyH[Name] Set printing area in page mod

1-34 Command Descriptions Rev. AESC T n[Name] Set print direction in page mode[Format] ASCII ESC T nHex 1B 54 nDecimal 27 84 n[Range] 0 ≤ n ≤ 348 ≤

Rev. A Command Descriptions 1-35TM–L60II/L60IIP Information ManualProgram Example Print SamplePRINT #1, CHR$(&H1B);"L";← Select p

1-36 Command Descriptions Rev. AGS $ nL nH[Name] Set absolute vertical print position in page mode[Format] ASCII GS $ nL nHHex 1D 24 nL nHDecimal

Rev. A Command Descriptions 1-37TM–L60II/L60IIP Information ManualBit-Image CommandsThe TM-L60II/L60IIP printers support the following bit-imag

1-38 Command Descriptions Rev. AProgram Example Print sample m=0: GOSUB bitimage8m=1: GOSUB bitimage8m=32: GOSUB bitimage24m=33: GOSUB bitimage24E

Rev. A Command Descriptions 1-39TM–L60II/L60IIP Information ManualGS ✻ x y d1...d(x × y × 8)[Name] Define downloaded bit image[Format] ASCII G

1-40 Command Descriptions Rev. AProgram Example Program Example (continued)x=16: y=5PRINT #1, CHR$(&H1D);"*";CHR$(x);CHR$(y);FOR i=1 T

Rev. A Command Descriptions 1-41TM–L60II/L60IIP Information ManualStatus CommandsThe TM-L60II/L60IP printers support the following status trans

1-42 Command Descriptions Rev. AFirst byte (printer information)Second byte (error information)Bit Off/On Hex Decimal Status for ASB0 Off 00 0 Not u

ii Rev. AFeaturesThe TM-L60II (RS-232 serial interface) and TM-L60IIP (parallel interface) are line thermal printers that can print on roll paper and

Rev. A Command Descriptions 1-43TM–L60II/L60IIP Information ManualThird byte (paper sensor information)Fourth byte (paper sensor information)GS

1-44 Command Descriptions Rev. APaper sensor status (n=1, 49)Drawer kick-out connector status (n=2, 50)DLE EOT n[Name] Real-time status transmission

Rev. A Command Descriptions 1-45TM–L60II/L60IIP Information ManualPrinter status (n=1)Off-line status (n=2)Program ExamplePRINT #1, CHR$(&H

1-46 Command Descriptions Rev. AError status (n=3)Paper roll sensor status (n=4)Bit Off/On Hex Decimal Function0 Off 00 0 Not used. Fixed to Off.1 O

Rev. A Command Descriptions 1-47TM–L60II/L60IIP Information ManualESC u n[Name] Transmit peripheral device status[Format] ASCII ESC u nHex 1B 7

1-48 Command Descriptions Rev. AESC v[Name] Transmit paper sensor status[Format] ASCII ESC vHex 1B 76Decimal 27 118ESC v transmits the status of a p

Rev. A Command Descriptions 1-49TM–L60II/L60IIP Information ManualBar Code CommandsThe TM-L60II/L60IIP printers support the following bar code

1-50 Command Descriptions Rev. AGS w n[Name] Set bar code width[Format] ASCII GS w nHex 1D 77 nDecimal 29 119 n[Range] 2 ≤ n ≤6GS w n sets the horiz

Rev. A Command Descriptions 1-51TM–L60II/L60IIP Information Manual➀ GS k m d1...dk NUL ➁ GS k m n d1...dn[Name] Print bar code[Format] ➀ ASCII

1-52 Command Descriptions Rev. AThe following apply to GS k m d1...dk NUL and GS k m n d1...dn in standard mode:❏ If d is outside of the specified r

Rev. A iiiThe TM-L60II can also be used as the following:❏ A one-station printer for ECR and POS.❏ A ticket-issuing device.❏ An output device for w

Rev. A Command Descriptions 1-53TM–L60II/L60IIP Information ManualGS H n[Name] Select printing position of HRI characters[Format] ASCII GS H nH

1-54 Command Descriptions Rev. AProgram Example Print SamplePRINT #1, CHR$(&H1D);"h";CHR$(80);← Set height to 80 dotsPRINT #1, CHR$(&a

Rev. A Command Descriptions 1-55TM–L60II/L60IIP Information ManualMacro Function CommandsThe TM-L60II/L60IIP printers support the following mac

1-56 Command Descriptions Rev. AIf this command is received while a macro is being defined, the printer ends macro definition mode and clears the de

Rev. A Command Descriptions 1-57TM–L60II/L60IIP Information ManualMiscellaneous Function CommandsThe TM-L60II/L60IIP supports the following mis

1-58 Command Descriptions Rev. AGS P x y[Name] Set horizontal and vertical motion units[Format] ASCII GS P xyHex 1D 50 xyDecimal 29 80 xy[Range] 0 ≤

Rev. A Command Descriptions 1-59TM–L60II/L60IIP Information ManualGS I n[Name] Transmit printer ID[Format] ASCII GS I nHex 1D 49 nDecimal 29 73

1-60 Command Descriptions Rev. AESC p m t1 t2[Name] Generate pulse[Format] ASCII ESC p mt1t2Hex 1B 70 mt1t2Decimal 27 112 mt1t2[Range] m = 0, 1, 48,

Rev. A Command Descriptions 1-61TM–L60II/L60IIP Information ManualESC L[Name] Select page mode[Format] ASCII ESC LHex 1B 4CDecimal 27 76ESC S[N

1-62 Command Descriptions Rev. AGS <[Name] Initialize printer mechanism[Format] ASCII GS <Hex 1D 3CDecimal 29 60GS < feeds label paper to t

iv Rev. A

Rev. A Command Descriptions 1-63TM–L60II/L60IIP Information ManualGS c[Name] Print counter [Format] ASCII GS cHex 1D 63Decimal 29 99GS c sets t

1-64 Command Descriptions Rev. Am specifies the printing position within the entire range of printed digits, as follows:GS C 1 aL aH bL bH n r[

Rev. A Command Descriptions 1-65TM–L60II/L60IIP Information ManualGS C 1 aL aH bL bH n r selects a count mode for the serial number counter. aL

1-66 Command Descriptions Rev. AGS C ; sa; sb; sn; sr; sc;[Name] Select count mode (B)[Format] ASCII GS C ; sa ; sb ; sn ; sr ; sc ;Hex 1D 43 3B sa

Rev. A Command Descriptions 1-67TM–L60II/L60IIP Information ManualCharacter Code TablesSP in a table represents space.Page 0 (PC437: U.S.A., St

1-68 Command Descriptions Rev. APage 2 (PC850: Multilingual)Page 3 (PC860: Portuguese)

Rev. A Command Descriptions 1-69TM–L60II/L60IIP Information ManualPage 4 (PC863: Canadian-French)Page 5 (PC865: Nordic)

1-70 Command Descriptions Rev. AInternational character setCountryASCII code (hexadecimal)Hex 2324405B5C5D5E607B7C7D 7EDec 3536649192939496123124125

Rev. A Command Descriptions 1-71TM–L60II/L60IIP Information ManualUsing Character Code TablesThe example below uses Page 0 (PC437) (see page 1-

Rev. A Application 2-1TM–L60II/L60IIP Information ManualChapter 2ApplicationThis chapter presents an example illustrating ESC/POS command funct

Rev. A Command Descriptions 1-1TM–L60II/L60IIP Information ManualChapter 1Command DescriptionsFollowing this table are all the commands organiz

2-2 Application Rev. AProgram ExamplePRINT #1, CHR$(&H1B);"@";← Initializes the printerNO$="00001" : GOSUB startNO$="00

Rev. A Command Reference 3-1TM–L60II/L60IIP Information ManualChapter 3Command ReferenceCommand ClassificationESC/POS printer commands in this

3-2 Command Reference Rev. AFunction TypeFunction Type Command Name Matrix CategorySupported CommandPrint commandsLFPrint and line feed Basic single

Rev. A Command Reference 3-3TM–L60II/L60IIP Information ManualCharacter commands (continued)ESC {Turn upside-down printing mode on/offBasic sin

3-4 Command Reference Rev. ABit-image commandsESC ✻Select bit-image mode Basic single●GS ✻Define downloaded bit image Software extension●GS /Print d

Rev. A Command Reference 3-5TM–L60II/L60IIP Information ManualMICR commandsFS a 0Read check paper Mechanical extensionFS a 1Load check paper to

3-6Reference TableCommand Name Function Supported CommandTM-267IITM-T Series TM-L Series TM-U200 TM-300/300MTM-270TM-U375TM-U375MTM-U925TM-U950TM-U950

3-7TM–L60II/L60IIP Information ManualCRPrint and carriage returnWhen auto line feed is enabled, this command functions in the same way as LF. When aut

3-8ESC !Select print mode(s)Selects a print mode(s).●●●●●●●●●●●●● ● ● ● ● ● ●ESC $Set absolute print positionSets the print starting position from the

3-9TM–L60II/L60IIP Information ManualESC @Initialize printerClears the data in the print buffer and resets the printer mode to the mode that was in ef

1-2 Command Descriptions Rev. AESC V Turn 90° clockwise rotation mode on/off Character 1-21ESC W Set printing area in page mode Print position 1-33

3-10ESC RSelect an international character setSelects a country’s character set.●●●●●●●●●●●●● ● ● ● ● ● ●ESC SSelect standard modeSwitches from page m

3-11TM–L60II/L60IIP Information ManualESC c 3Select paper sensor(s) to output paper-end signalsSelects paper sensor(s) to output paper-end signals.O O

3-12ESC mPartial cut (three points left uncut)Executes a partial cut of the paper with three points left uncut.●●●●● ● ●ESC oStamp Executes stamp prin

3-13TM–L60II/L60IIP Information ManualFS &Select Kanji character modeSelects Kanji character mode.●OOOO O OFS –Turn underline mode on/off for Kanj

3-14FS a 1Load check paper to print starting positionLoads check paper to the print starting position.OOFS a 2Eject check paperEjects the check paper.

3-15TM–L60II/L60IIP Information ManualGS /Print downloaded bit imagePrints a downloaded bit image using a specified mode.●●●●●● ●●●GS :Start/end macro

3-16GS HSelect printing position of HRI charactersSelects the printing position of HRI characters when printing a bar code.●●●●●●GS ITransmit printer

3-17TM–L60II/L60IIP Information ManualGS aEnable/disable Automatic Status Back (ASB)Selects a status for ASB transmission.●●●● ●●●●GS bTurn smoothing

SEIKO EPSON CORPORATIONSYSTEM DEVICE DIVISION2070 Kotobuki Koaka, Matsumoto-shi, Nagano-ken 399, Japan