Seiko SLP410 Guia do Utilizador descarregar pdf (Página 19)

Removing Stuck Labels

If a label becomes stuck in your SLP, remove it as follows:

1 With a pair of scissors, cut the label stock between the label roll and the label slot at the

back of the printer.

2 Swivel the label cover open and remove the print engine cover by pulling forward on the

edges at the top of the cover.

3 Release the pressure on the label stock by moving the platen release lever forward.

4 Remove the stuck label.

5 If the label — or pieces of the label — stick to the platen, use a small amount of isopropyl

rubbing alcohol on a cotton swab to dissolve the adhesive on the back of the label.

CAUTION: DO NOT touch the print engine. It may be hot.

6 Once you have removed any remaining pieces of label, return the platen release lever

to the locked position.

7 Replace the print engine cover, starting at the bottom, on the SLP and push the top

edge forward until the cover snaps into place.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Sem comentários

Seiko SLP410 Guia do Utilizador Página 19