Seiko STOPWATCH S143 Guia de Resolução de Problemas descarregar pdf (Página 5)

When the grip switch is used:

① Changeover to the grip switch

● Connect the grip switch to the stopwatch.

② Time measurement

● The measurement is started by pressing the grip switch

once. Split time and lap time can be measured repeatedly

with each press of the grip switch.

Grip switch

● Slide up the grip switch selector located on the right side of the

stopwatch.

EXT

▲

＊While the grip switch selector is set at the

upper position, button ○

Ａ

and ○

will not work,

and the stopwatch is operated solely by the

grip switch.

＊By pressing the grip switch, split time and lap time can be measured, but the

measurement cannot be stopped. After the final split or lap time is measured,

follow the stops in ④ End of measurement" to stop the measurement.

③Printout of lapse of time (Only when in the

time/calendar mode and the power switch of the

printer is on)

●The stopwatch can printout the time a lap time is measured

in the same manner as you press the grip switch in the

stopwatch mode.

（Start）→（With each press of the grip

switch, split time and lap time

are measured repeatedly.）

Upper position

How to use the lock lever

④End of measurement

● After the measurement is over, slide down the grip switch

selector.

●After sliding down the selector, press button ○

Ａ

to stop the

measurement and then press button ○

Ｂ

to reset the

stopwatch.

EXT

▲

Lower position

SPLIT

RECALL

BLOCK

LAP

STOP

BATT.

LAP

LAP／SPLIT

RESET

START

STOP

(Stop)

○

Ａ

SPLIT

RECALL

BLOCK

LAP

STOP

BATT.

LAP

LAP／SPLIT

RESET

START

STOP

(Reset to "00")

○

Ｂ

To prevent any mistaken operation of button ○

Ａ

(start/stop

of the stopwatch) during the measurement, it is

recommended that button ○

Ａ

be locked with the lock lever

after the measurement is started.

BLOCK

SYSTEM STOPWATCH

300LAP／SPLIT MEMORY

LOCK

LAP／SPLIT

RESET

START

STOP

CLEAR

1/100 STOP.W A/S SET TIME

RECALL

Lock lever

After the measurement is started,

slide down the lock lever.

＊While the lock lever is slid down,

button ○

Ａ

(START/STOP) is locked

and cannot be pressed.

STOP-W. A/S SET TIME

５.HOW TO USE THE MEMORY FUNCTION

RECALL

BLOCK

STOP

BATT.

LAP

300LAP／SPLIT MEMORY

LOCK

LAP／SPLIT

RESET

START

STOP

CLEAR

1/100 STOP.W A/S SET TIME

RECALL

Button ○

Ａ

Button ○

Ｂ

STOP-W. A/S SET TIME

Recall button（Memory recall button）

■The memory recall function

・The data obtained in the measurement can be recalled and displayed.

・Up to 100 blocks of data or 300 data can be stored and recalled.

・Besides being recalled and displayed, the data in memory can also be printed out.

(Refer to "6. HOW TO PRINT OUT")

・The stored data is recalled by pressing recall button. The data is recalled successively

if the button is kept pressed.

・The stored data can be recalled while the stopwatch is measuring.

・The data can be stored in memory even while printing out the data during the

measurement.

・Order of recalling the stored data

When the stopwatch is stopped

When the stopwatch is in use

With each press of recall button

The data is recalled starting from the oldest one.

The data is recalled starting from the newest one.

・Button operation while the stored data is recalled

Display before recall

Reset

Stopped

Measuring

Button ○

Ａ

Button ○

Ｂ

Clearing the data in

memory

Returning to the display

before recall

Measuring lap/split time

Returning to the

display before recall

Returning to the

display before recall

Returning to the

display before recall

Returning to the

display before recall

Returning to the

display before recall

Stopping the

measurement

mode selection

button ① (STOP.W)

1 2 3 4 5 6 7 8 9 10 ... 13 14

Comentários a estes Manuais

Sem comentários

Seiko STOPWATCH S143 Guia de Resolução de Problemas Página 5

Comentários a estes Manuais